ADTRAN AOS Version R10.1.0 Command Reference Manual page 2661

Command Reference Guide
ipv6 nd managed-config-flag
Use the ipv6 nd managed-config-flag command to specify the M flag in Internet Protocol version 6
(IPv6) router advertisement (RA) messages. The M flag instructs hosts receiving the RA that they can use
stateful Dynamic Host Configuration Protocol version 6 (DHCPv6) to configure addresses and nonaddress
information. Use the no form of this command to disable the setting of the M flag.
Syntax Description
No subcommands.
Default Values
By default, the M flag is not set in RAs.
Command History
Release 18.1
Release R10.1.0
Functional Notes
If you specify that the M flag is set in RA messages, you do not need to set the 0 flag (it becomes
redundant).
Usage Examples
The following example sets the M flag for RA messages sent by the interface:
(config)#interface tunnel 1
(config-tunnel 1)#ipv6 nd managed-config-flag
60000CRG0-35E
Command was introduced.
Command was expanded to include the tunnel interface.
Copyright © 2012 ADTRAN, Inc.
Tunnel Interface Command Set
2661