ADTRAN AOS Version R10.1.0 Command Reference Manual page 2671

Command Reference Guide
ipv6 nd ra suppress
Use the ipv6 nd ra suppress command to specify whether Internet Protocol version 6 (IPv6) router
advertisement (RA) messages will be suppressed. This command only applies to interfaces in router mode.
Use the no form of this command to begin sending RA messages.
Syntax Description
No subcommands.
Default Values
By default, RA messages are not suppressed. When IPv6 routing is not enabled on the router, or when
implemented in a host-only mode, the default setting is to suppress advertisements on all interface types.
Command History
Release 18.1
Release R10.1.0
Usage Examples
The following example suppresses RA messages on the interface:
(config)#interface tunnel 1
(config-tunnel 1)#ipv6 nd ra suppress
60000CRG0-35E
Command was introduced.
Command was expanded to include the tunnel interface.
Copyright © 2012 ADTRAN, Inc.
Tunnel Interface Command Set
2671