Table of Contents
Advertisement
Command Reference Guide
Tunnel Interface Command Set
lldp receive
Use the lldp receive command to allow Link Layer Discovery Protocol (LLDP) packets to be received on
this interface. Use the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Command History
Release 9.1
Command was introduced.
Usage Examples
The following example configures the tunnel interface to receive LLDP packets:
(config)#interface tunnel 1
(config-tunnel 1)#lldp receive
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2675
Advertisement
Table of Contents
