Pim-To-Mld-Proxy; Point-To-Point - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

pim-to-mld-proxy

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

point-to-point

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1910
®
OS for EX Series Ethernet Switches, Release 10.3
pim-to-mld-proxy {
upstream-interface [ interface-names ];
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Statement introduced in Junos OS Release 9.6.
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Configure the rendezvous point (RP) routing device that resides between a customer
edge–facing Protocol Independent Multicast (PIM) domain and a core-facing PIM domain
to translate PIM join or prune messages into corresponding Multicast Listener Discovery
(MLD) report or leave messages. The routing device then transmits the report or leave
messages by proxying them to one or two upstream interfaces that you configure on the
RP routing device. Including the
to forward IPv6 multicast traffic across the PIM sparse mode domains.
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring PIM-to-MLD Message Translation
point-to-point;
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an IS-IS interface to behave like a point-to-point connection.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Point-to-Point Interfaces for IS-IS
statement enables you to use MLD
pim-to-mld-proxy
Copyright © 2010, Juniper Networks, Inc.