Ipv6 Mld-Proxy Unsolicited-Report-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ipv6 mld-proxy unsolicited-report-interval
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipv6 mld-proxy unsolicited-report-interval tenths-of-a-second
no ipv6 mld-proxy unsolicited-report-interval
Command introduced before JunosE Release 7.1.0.
Specifies how often the upstream interface should transmit unsolicited reports. This
command has no effect on interfaces other than the upstream value. The no version
transmits unsolicited reports using the default value, 100-tenths of a second (10 seconds).
NOTE: Issue this command only on the upstream interface. Otherwise, this command
will have no effect.
tenths-of-a-seconds—Time interval at which the interface transmits unsolicited reports
Interface Configuration
Chapter 10: I Commands
1039
Advertisement
Table of Contents
