Display Interface Virtual-Template - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

504
C
31: PPP
HAPTER
AND

display interface virtual-template

Syntax
View
Parameter
Description
Related command:
Example
MP C
C
ONFIGURATION
OMMANDS
Table 82 Description on the fields of the display interface mp-group command
Field
LCP initial
Physical
Last 300 seconds input: 0 bytes/sec
0 packets/sec
Last 300 seconds output: 0 bytes/sec
0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
display interface virtual-template [ number ]
Any view
number: Virtual template (VT) number, which can be the number of any existing
VT.
Use the
display interface virtual-template
about a VT. If you do not provide the number argument, this command will display
the information about all the existing VTs.
interface virtual-template.
# View the information about VT 1.
<Sysname> display interface virtual-template 1
Virtual-Template1 current state: UP
Line protocol current state: UP (spoofing)
Description: Virtual-Template1 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
Link layer protocol is PPP
LCP initial
Physical is None
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards)
Last 300 seconds input:
Last 300 seconds output:
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Refer to Table 82 for the description on the other fields.
Description
Link control protocol (LCP) negotiation is complete
Physical type of the interface
Average rate of input packets and output packets in the
last 300 seconds (in bps)
Total amount of input packets of the interface (in the
number of packets and in bytes respectively), and the
number of dropped packets within the input packets
Total amount of output packets of the interface (in the
number of packets and in bytes respectively), and the
number of dropped packets within these output
packets
command to view the information
0 bytes/sec 0 packets/sec
0 bytes/sec 0 packets/sec
0/50/0
0/75/0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents