Mirroring-Group Mirroring-Port - H3C MSR 20-20 Command Reference Manual

498 C 30: P
HAPTER ORT
View
Parameter
Description
Example

mirroring-group mirroring-port

Syntax
View
Parameter
Description
M C C
IRRORING ONFIGURATION
undo mirroring-group { groupid | local }
System view
groupid: Port mirroring group number. The value range is 1 to 5 for MSR 20 and
BSR 30 series routers and 1 to 10 for MSR 50 series routers.
local: Creates a local port mirroring group/removes all local port mirroring groups.
Use the
mirroring-group
Use the undo mirroring-group
mirroring group or all local port mirroring groups.
# Create a local port mirroring group numbered 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
mirroring-group groupid mirroring-port mirroring-port-list { both | inbound |
outbound }
undo mirroring-group groupid mirroring-port mirroring-port-list { both | inbound |
outbound }
System view
groupid: Port mirroring group number. The value range is 1 to 5 for MSR 20 and
BSR 30 series routers and 1 to 10 for MSR 50 series routers.
mirroring-port-list: List of ports to be added to the port mirroring group. You can
specify multiple ports by providing this argument in the form of { interface-type
interface-number [ to interface-type interface-number ] }&<1-8>, where the
interface-type argument is port type, the interface-number argument is the port
number, and &<1-8> means that you can provide up to eight port indexes/port
index lists for this argument.
both: Specifies to mirror both inbound and outbound packets.
inbound: Specifies to mirror inbound packets only.
outbound: Specifies to mirror outbound packets only.
Use the
mirroring-group mirroring-port
mirroring group as source ports.
Use the undo mirroring-group mirroring-port
ports from a port mirroring group.
OMMANDS
command to create a port mirroring group.
command to remove the specified port
command to add ports to a port
command to remove source