Display Interface Mp-Group - H3C MSR 20-20 Command Reference Manual

31

display interface mp-group

Syntax
View
Parameter
Description
Example
PPP MP C
AND
C
OMMANDS
display interface mp-group [ mp-number ]
Any view
mp-number: Multilink point to point protocol group (MP-group) interface number,
which can be the number of any existing MP-group interface.
Use the
display interface mp-group
an existing MP-group interface. If the mp-number argument is not specified, the
information about all existing MP-group interfaces is displayed.
# View the information about the interface MP-group 12.
<Sysname> display interface mp-group 12
Mp-group12 current state: DOWN
Line protocol current state: DOWN
Description: Mp-group12 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet protocol processing : disabled
Link layer protocol is PPP
LCP initial
Physical is MP
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards)
Last 300 seconds input:
Last 300 seconds output:
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Table 82 Description on the fields of the display interface mp-group command
Field
current state
Line protocol current state
Description
The Maximum Transmit Unit
Hold timer
Internet protocol processing
ONFIGURATION
command to view the information about
0 bytes/sec 0 packets/sec
0 bytes/sec 0 packets/sec
Description
Physical state of the interface (up or down)
State of the data link layer protocol (up or down)
Description string of the interface
Maximum transmit unit (MTU) of the interface
Hold time of the link state (up/down) of the current
interface
State of the network layer protocol (enabled or
disabled)
0/50/0
0/75/0