Debugging Link-Aggregation Error - H3C MSR 20-20 Command Reference Manual

488 C 28: L A
HAPTER INK

debugging link-aggregation error

Syntax
View
Default Level
Parameters
Description
D C
GGREGATION EBUGGING OMMANDS
<Sysname> debugging lacp state interface ethernet 1/2 rx
*0.1360830 Sysname LAGG/8/FSM:
Port Ethernet1/2: FSM Rx
by the stimulation Begin_True
// RX state machine was initiated and then transited to the INITIALIZE state. The
event that triggered the transition was the startup of the state machine
(Begin_True).
*0.1360830 Sysname LAGG/8/FSM:
Port Ethernet1/2: FSM Rx
by the stimulation UCT
// RX state machine transited from the INITIALIZE state to the PORT_DISABLED
state unconditionally (identified by UCT).
*0.1360830 Sysname LAGG/8/FSM:
Port Ethernet1/2: FSM Rx
e EXPIRED by the stimulation Lacp_Enabled
// RX state machine transited from the PORT_DISABLED state to the EXPIRED state.
The event that triggered the transition was the enabling of LACP (Lacp_Enabled).
*0.1360862 Sysname LAGG/8/FSM:
Port Ethernet1/2: FSM Rx
by the stimulation Pdu_Indicate
// RX state machine transited from the EXPIRED state to the CURRENT state
(normal running state). The event that triggered the transition was the reception
of the protocol packets from the peer (Pdu_Indicate).
debugging link-aggregation error
undo debugging link-aggregation error
User view
1: Monitor level
None
Use the debugging link-aggregation error
for link aggregation errors.
Use the
undo debugging link-aggregation error
debugging for link aggregation errors.
By default, debugging for link aggregation errors is disabled.
transfers from state RESERVE to state INITIALIZE
transfers from state INITIALIZE to state PORT_DISABLED
transfers from state PORT_DISABLED to stat
transfers from state EXPIRED to state CURRENT
command to enable debugging
command to disable