Debugging Link-Aggregation Event - H3C MSR 20-20 Command Reference Manual

Examples

debugging link-aggregation event

Syntax
View
Default Level
Parameters
Description
Table 78 Description on the fields of debugging link-aggregation error command
Field
File
Line
ERROR
# Enable debugging for link aggregation errors to view the error information
prompted during the system running.
<Sysname> debugging link-aggregation error
*0.21953 Sysname LAGG/8/lacpErrorEvent:
File e:v500d05sp1softwarelacplacp_agm.c, Line: 1200
ERROR------ Portindex: 1
// File e:v500d05sp1softwarelacplacp_agm.c has a running error, which occurs at
line 1200. The ERROR field indicated that the system MAC address obtained is
null.
debugging link-aggregation event
undo debugging link-aggregation event
User view
1: Monitor level
None
Use the
debugging link-aggregation event
for link aggregation events.
Use the
undo debugging link-aggregation event
debugging for link aggregation events.
By default, debugging for link aggregation events is disabled.
Table 79 Description on the fields of debugging link-aggregation event command
Field
Agg Index
Cfg MD5
Restriction Value
Admin Key
Port Pri
Sys Mac
Sys Pri
Oper Key
Description
The program file that incurs a running error
The number of the line where the error occurs
Error description
LACP_SendLACPPacket ,g_ucLacpSysMAC NULL !
command to enable debugging
Description
Aggregation group ID
MD5 digest
Hardware restriction parameter
Administration key
Port LACP priority
System MAC address
System LACP priority
Port operation key
489
command to disable