Debugging Lacp Packet - H3C MSR 20-20 Command Reference Manual

28

debugging lacp packet

Syntax
View
Default Level
Parameters
Description
L A
INK GGREGATION
C
OMMANDS
debugging lacp packet [ interface interface-type interface-number [ to interface-type
interface-number ] ]
undo debugging lacp packet [ interface interface-type interface-number [ to
interface-type interface-number ] ]
User view
1: Monitor level
interface-type interface-number: Port type and port number.
to: Specifies the ports with their port type and port number within the port range
enclosed by the two interface-type-interface-number argument pairs around this
keyword.
Use the debugging lacp packet
protocol packets on the specified port(s).
Use the undo debugging lacp packet
LACP protocol packets on the specified port(s).
By default, debugging for LACP protocol packets is disabled on a port.
If no port is specified, the command applies to all the ports running LACP.
Table 76 Description on the fields of the debugging lacp packet command
Field
size
subtype
version
D
EBUGGING
command to enable debugging for LACP
command to disable debugging for
Description
Size of a protocol packet, which is 128 bytes.
Sub type of a protocol packet, which is 1 for
LACP protocol packets.
Protocol version, which is 1 for LACP.