Description
Related command:
Example
port-group aggregation
Syntax
View
Parameter
Description
Example
reset lacp statistics
Syntax
View
Parameter
Use the
port link-aggregation group
link aggregation group (manual or static LACP).
Use the
undo port link-aggregation group
port from a link aggregation group.
display link-aggregation verbose.
# Assign port Ethernet 1/0 to link aggregation group 22.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] port link-aggregation group 22
port-group aggregation agg-id
System view
agg-id: Aggregation port group ID, in the range 1 to 144.
Use the
port-group aggregation
view.
Instead of being created administratively, an aggregation port group is created
automatically upon creation of a link aggregation group and assigned the ID of
the link aggregation group. In aggregation port group view, you can configure
aggregation related settings such as STP, VLAN, QoS, GVRP, and MAC address
learning, but cannot add or remove member ports.
# Enter aggregation port group view.
<Sysname> system-view
[Sysname] port-group aggregation 10
[Sysname-port-group-aggregation-10]
reset lacp statistics [ interface interface-type interface-number [ to interface-type
interface-number ] ]
User view
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies an interface range or an interface if the to keyword and the second
interface are not specified.
command to add the Ethernet port to a
command to remove the Ethernet
command to enter aggregation port group
481