Lacp System-Priority; Link-Aggregation Group Description - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

lacp system-priority

Syntax
View
Parameter
Description
Example

link-aggregation group description

Syntax
View
Parameter
Description
Use the
lacp port-priority
Use the
undo lacp port-priority
By default, port LACP priority is 32768.
display link-aggregation interface, display link-aggregation verbose.
# Assign LACP priority 64 to a port.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] lacp port-priority 64
lacp system-priority system-priority
undo lacp system-priority
System view
system-priority: System LACP priority, in the range 0 to 65535.
Use the
lacp system-priority
system.
Use the undo lacp system-priority
By default, system LACP priority is 32768.
# Assign LACP priority 64 to the local system.
<Sysname> system-view
[Sysname] lacp system-priority 64
link-aggregation group agg-id description agg-name
undo link-aggregation group agg-id description
System view
agg-id: Link aggregation group ID, in the range 1 to 144.
agg-name: Link aggregation group name, a string of 1 to 32 characters.
Use the link-aggregation group
for the specified link aggregation group.
command to assign an LACP priority to the port.
command to restore the default.
command to assign an LACP priority to the local
command to restore the default.
description command to configure a name
479