debugging lacp state
Syntax
View
Default Level
Parameters
Description
Examples
debugging lacp state [ interface interface-type interface-number [ to interface-type
interface-number ] ] { { actor-churn | mux | partner-churn | ptx | rx } * | all }
undo debugging lacp state [ interface interface-type interface-number [ to
interface-type interface-number ] ] { { actor-churn | mux | partner-churn | ptx | rx } *
| all }
User view
1: Monitor level
interface-type interface-number: Port type and port number.
to: Specifies the ports with their port type and port number within the port range
enclosed by the two interface-type-interface-number argument pairs around this
keyword.
actor-churn: Debugging for Actor-churn state machine.
mux: Debugging for MUX state machine.
partner-churn: Debugging for Partner-churn state machine.
ptx: Debugging for PTX state machine.
rx: Debugging for RX state machine.
all: Debugging for all the state machines.
Use the
debugging lacp state
protocol state machines on the specified port(s).
Use the
undo debugging lacp state
protocol state machines on the specified port(s).
By default, debugging for LACP protocol state machines is disabled on a port.
If no port is specified, the command applies to all the ports running LACP.
Table 77 Description on the fields of the debugging lacp state command
Field
from state XXX
to state XXX
stimulation
# Enable debugging for Rx state machine on Ethernet 2/1 to view the information
about LACP Rx state transition.
command to enable debugging for LACP
command to disable debugging for LACP
Description
The original state of a state transition
The final state of the state transition
The event that triggers the state transition
487