Reset Xot; Reset X25 - H3C MSR 20-20 Command Reference Manual

438 C 26: LAPB
HAPTER
View
Parameter
Description
Example

reset xot

Syntax
View
Parameter
Description
Example

reset x25

Syntax
View
Parameter
X.25 C C
AND ONFIGURATION OMMANDS
User view
x121-address: Destination X.121 address, a string of 1 to 15 numerical characters.
Use the pad command to establish a X.25 PAD connection and logon to the
remote site.
PAD is similar to telnet. It can establish the connection from the local to the
remote through the remote X121 address to carry out configuration operations.
# Establish a PAD connection to the destination X.121 address 2.
<Sysname> pad 2
reset xot local local-ip-address local-port remote remote-ip-address remote-port
User view
local-ip-address: Local IP address of the XOT connection.
local-port: Local port number of the XOT connection.
remote-ip-address: Remote IP address of the XOT connection.
remote-port: Remote port number of the XOT connection.
For SVC, use the reset xot command to clear an XOT link.
For PVC, use the reset xot command to reset an XOT link.
When you clear or reset the XOT link, you can obtain the required ports using the
display x25 xot or display tcp status command.
# Clear or reset the XOT link.
<Sysname> reset xot local 10.1.1.1 1998 remote 10.1.1.2 1024
reset x25 { counters interface interface-type interface-number | vc interface
interface-type interface-number [ vc-number ] }
User view
counters: Resets interface statistics.
vc: Resets X.25 virtual circuit.