Reset Lapb Statistics; Translate Ip - H3C MSR 20-20 Command Reference Manual

Description
Example

reset lapb statistics

Syntax
View
Parameter
Description
Example

translate ip

Syntax
View
Parameter
interface-type interface-number: Specifies an interface by its type and number.
vc-number: Virtual circuit number of PVC or SVC, in the range 1 to 4095.
Use the command to reset X.25 protocol statistics or X.25 virtual circuit
reset x25
on the specified interface.
For PVC number, the command resets the PVC.
For SVC number, the command deletes the SVC.
# Reset the X.25 statistics on Serial 2/0.
<Sysname> reset x25 counters interface serial 2/0
reset lapb statistics
Interface view
None
Use the reset lapb statistics
# Clear the LAPB statistics on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] reset lapb statistics
translate ip ip-address port port-number { pvc interface-type interface-number
pvc-number | x25 x.121-address }
undo translate ip ip-address port port-number
System view
ip-address: Local IP address.
port port-number: TCP port number on which the local router listen messages, in
the range 1 to 65535.
Interface-type interface-number: Specifies an interface by its type and number.
pvc-number: PVC number, in the range 1 to 4095.
x.121-address: X.121 address.
command to clear LAPB statistics.
439