Modem Timer Answer - H3C MSR 20-20 Command Reference Manual

492 C 29: M
HAPTER ODEM
Example

modem timer answer

Syntax
View
Parameter
Description
Example
C C
ONFIGURATION OMMANDS
Use the undo modem auto-answer
external modem to answer automatically. In this case, the modem answers only
when receiving an AT command sent by software.
By default, the connected external modem is set to non-auto answer mode.
Use this command depending on the answer state of the connected external
modem. When the modem is in auto-answer mode (AA LED of the modem lights),
configure the modem auto-answer command to prevent the router from
sending an answer command after the modem answers automatically. If the
modem is in non-auto answer mode, configure the undo modem auto-answer
command.
n
If the configuration of this command is not consistent with the current answer
state of the connected modem, anomalies may occur. You are not encouraged to
configure this command.
# Set the answer mode of the modem connected to the asynchronous serial
interface User-interface1 to auto.
<Sysname> system-view
[Sysname] user-interface tty 1
[Sysname-ui-tty1] modem auto-answer
modem timer answer time
undo modem timer answer
User interface view
time: Timeout time, in the range 1 to 60 seconds.
Use the
modem timer answer
to dial.
Use the
undo modem timer answer
By default, the valid interval is 30 seconds.
n
This command is only valid for AUX interface and other asynchronous interfaces.
# Set the valid interval from user hookoff to dial to 50 seconds.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem timer answer 50
command to disable the connected
command to set the interval from user hookoff
command to restore the default.