H3C MSR 20-20 Command Reference Manual page 486

486 C 28: L A
HAPTER INK GGREGATION
n
D C
EBUGGING OMMANDS
// The device received an LACP protocol packet through Ethernet 1/1.
*0.1221133 Sysname LAGG/8/Pkt:
size=128, subtype =1, version=1
// The length of the LACP packet was 128 bytes, the protocol sub type was 1, and
the version number was 1.
Actor: tlv=1, len=20, sys-pri=0x8000, sys-mac=00e0-fc00-0000, key=0x
1, pri=0x8000, p=0x6, state=0x3d
// The local port information carried in the packet was as follows:
length: 20
■
system LACP priority: 0x8000
■
system MAC address: 00e0-fc00-0000
■
port operation key: 0x1
■
port LACP priority: 0x8000
■
port number: 0x6
■
current LACP state flag of the port: 0x3d
■
Partner: tlv=2, len=20, sys-pri=0x8000, sys-mac=00e0-fc02-0300, key=
0x1, pri=0x8000, p=0x1, state=0xd
// The peer port information carried in the packet was as follows:
length: 20
■
system LACP priority: 0x0
■
system MAC address: 00e0-fc02-0300
■
port operation key: 0x1
■
port LACP priority: 0x8000
■
port number: 0x1
■
current LACP state flag of the port: 0xd
■
Collector: tlv=3, len=16, col-max-delay=0
// The content of the Collector field in the protocol packet was as follows:
length: 16
■
maximum delay: 0
■
Terminator: tlv=0, len=0
// The length of the Terminator field in the protocol packet is 0.
Other similar LACP protocol packet information is omitted here.