Display X25 Map - H3C MSR 20-20 Command Reference Manual

426 C 26: LAPB
HAPTER
Parameter
Description
Related command:
Example

display x25 map

Syntax
View
Parameter
Description
X.25 C C
AND ONFIGURATION OMMANDS
hunt-group-name: Hunt group name, a string of 1 to 30 characters.
Use the display x25 hunt-group-info
of X.25 hunt group.
You can use this command to learn the hunt group of the Router and the
information about the interfaces and XOT channel inside the hunt group.
x25 hunt-group.
# Display the status information of X.25 hunt group hg1.
<Sysname> display x25 hunt-group-info hg1
HG_ID : hg1
member state
Serial1/0 Last used
Serial2/0 Next
1.1.1.1 Normal
Table 57 Description on the fields of the display x25 hunt-group-info command
Field
HG_ID : hg1
HG_Type: round-robin
member
state
vc-used
in-pkts
out-pkts
display x25 map
Any view
None
Use the display x25 map
The X.25 address mapping can be configured in two methods: using the x25 map
command or using the x25 pvc command. The display x25 map command can
display all the address mappings.
HG_Type: round-robin
vc-used
2
1
1
Description
The hunt group name is hg1
Hunt group call channel selection policy (including round-robin
and vc-number)
Interfaces or XOT channel contained in hunt group
The state of the current interface or XOT channel, including:
Last used: latest used
Next: next selected
Normal: normal state
Unavail: Unavailable state
Number of calls on the interface or XOT channel (including call
success and call failure)
Input flow on the interface or XOT channel in packets
Output flow on the interface or XOT channel in packets
command to display the X.25 address mapping table.
command to view the status information
in-pkts out-pkts
51 20
21 15
24 3