H3C MSR 20-20 Command Reference Manual page 460

460 C 26: LAPB
HAPTER AND
Description
X.25 C C
ONFIGURATION OMMANDS
Table 69 X.121 mode matching rules
Wildcard
characters Matching rules
.* Matching arbitrary zero or more
characters
.+ Matching arbitrary one or more
characters
Table 70 Input rules of X.121 address mode matching string
Characters Input rules
* Cannot be placed at the beginning of character string
Cannot be placed after the symbol ^
Cannot be placed before and after the symbols + and *.
+ Cannot be placed at the beginning of character string
Cannot be placed after the symbol ^
Cannot be placed before and after the symbols + and *.
Cannot be placed at the end of character string
^ Cannot be placed before the symbols + and *.
-number: SVC route number.
sub-dest destination-address: Replaces the destination X.121 address, an
alphanumeric string of 1 to 15 characters. The system replaces the destination DTE
address in the call request packet with the destination-address.
sub-source source-address: Replaces the source X.121 address, an alphanumeric
string of 1 to 15 characters. The system replaces the source DTE address in the call
request packet with the source-address.
interface interface-type interface-number: Interface type and interface number.
dlci dlci-number: Specifies an DLCI. The dlci-number argument is in the range 16
to 1007.
Use the
x25 switch svc
indicating the packet to be forwarded to the destination address through the
specified interface.
Use the
undo x25 switch svc
A device with X.25 switching configured can act as a simple X.25 switch.
The output interface of the SVC switching can be an X.25 interface, or FR
interface Annex G DLCI. The link layer of the output interface must be X.25, or FR
with the Annex G DLCI configured for output.
Before using this command, you should use the x25 switching command to
enable X.25 switching.
By default, no SVC is defined.
command to configure an SVC (switching virtual circuit),
command to delete the SVC route.
Matchable
Example character string
fo.* fo, foo, fot
fo.+ foo, fot, foot