Display Link-Aggregation Summary - H3C MSR 20-20 Command Reference Manual

display link-aggregation summary

Syntax
View
Parameter
Description
Table 73 Description on the fields of display link-aggregation interface
Field
Flags
Selected AggID
Local:
Port-Priority, Oper key, Flag
Remote:
System ID, Port Number,
Port-Priority, Oper-key, Flag
Received LACP Packets, Illegal,
Sent LACP Packets
display link-aggregation summary
Any view
None
Use the
display link-aggregation summary
for all link aggregation groups.
Description
One-octet LACP state flags field. From the least to the most
significant bit, they are represented by A through H as
follows:
A indicates whether LACP is enabled, 1 for enabled and
■
0 for disabled.
B indicates the timeout control value, 1 for short
■
timeout, and 0 for long timeout.
C indicates whether the sending system considers this
■
link to be aggregatable, 1 for true, and 0 for false.
D indicates whether the sending system considers that
■
this link is synchronized, 1 for true, and 0 for false.
E indicates whether the sending end considers that
■
collection of incoming frames is enabled on the link, 1
for true and 0 for false.
F indicates whether the sending system considers that
■
distribution of outgoing frames is enabled on the link, 1
for true and 0 for false.
G indicates whether the receive state machine of the
■
sending system is using default operational partner
information, 1 for true and 0 for false.
H indicates whether the receive state machine of the
■
sending system is in the expired state, 1 for true and 0
for false.
If a flag bit is set to 1, the corresponding English letter that
otherwise is not output displays.
ID of the link aggregation group of which this port is a
member
Local port LACP priority, operational key, LACP state flag
Remote system ID, port number, port LACP priority,
operational key, and LACP state flag
Statistics about received, invalid, and sent LACP packets
command to display a summary
475