Display X25 Pad - H3C MSR 20-20 Command Reference Manual

Example

display x25 pad

Syntax
View
Parameter
Description
Example
# Display the X.25 address mapping table.
<Sysname> display x25 map
Interface:Serial3/0(protocol status is up):
ip address:202.38.162.2
map-type: SVC_MAP
Facility:
ACCEPT_REVERSE;
BROADCAST;
PACKET_SIZE: I 512
Table 58 Description on the fields of the display x25 map command
Field
Interface:Serial3/0(protocol status is up)
ip address:202.38.162.2 X.121 address: 22
map-type: SVC_MAP
VC-number: 0
Facility:
display x25 pad [ pad-id ]
Any view
pad-id: X.25 PAD connection (packet assembly/disassembly facility). The ID is in
the range 0 to 255.
Use the display x25 pad
If no pad ID is specified, all PAD connection information will be displayed.
# Display all X.25 PAD connection information.
<Sysname> display x25 pad
UI-INDEX130:
From remote 22 connected to local 11, State: Normal
X.3Parameters(In):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
X.3Parameters(Out):
1:1,2:0,3:2,4:1,5:0,6:0,7:21,8:0,9:0,10:0,11:14
12:0,13:0,14:0,15:0,16:127,17:21,18:18,19:0,20:0,21:0,22:0
Input:
Pkts(total/control): 13/2
queue(size/max) :0/200
Output:
Pkts(total/control): 15/2
X.121 address: 22
VC-number: 0
O 512
Description
Interface name and protocol status
IP address and X.121 address of the
interface
Mapping type
VC number
User facility of the interface
command to display X.25 PAD connection information.
bytes:12
bytes:320
427