Forward - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

Software for e series broadband services routers command reference a to m
Hide thumbs Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
Table of Contents

Advertisement

forward

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
[ no ] [ suspend ] forward
[ interface interfaceType interfaceSpecifier [ next-hop nextHop
[ ignore-default-route ] ]
[ order orderValue ] ] | [ next-hop nextHop [ virtual-router vrName ]
[ ignore-default-route ] [ order orderValue ] ] |
[ order orderValue ] | classifier-group claclName ] [ precedence precValue ]
Command introduced before JunosE Release 7.1.0.
Defines a rule to forward all packets that match the specified classifier control list. If you
do not specify a classifier control list using the classifier-group keyword, the router will
select all packets from the interface in the direction of the attached policy list. The no
version removes the rule from the policy list; the suspend version temporarily suspends
the forward rule; the no suspend version resumes application of a suspended rule.
See the forward interface and forward next-hop commands for descriptions of the
Classifier Group Configuration mode versions of this command.
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5 (IP
policy lists only)
interfaceSpecifier—Particular interface; format varies according to interface type; see
"Interface Types and Specifiers" on page 5 (IP policy lists only)
nextHop—Next-hop IP address (IP policy lists only)
ignore-default-route—Ignores the default route as a consideration for the next hop (IP
policy lists only)
vrName—Name of the virtual router (IP policy lists only)
orderValue—Order of this forward rule within the single classifier; in the range 1–32767;
default value is 100 (IP policy lists only)
claclName—Classifier control list used to classify packets for this policy
precValue—Precedence of this rule in relation to other rules within this set: in the range
0–32768; default value is 100
Policy List Configuration
Assigning Values to the ATM CLP Bit
Chapter 7: F Commands
629

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Junose 11.2

Table of Contents