Flash-Disk Scan - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

flash-disk scan

Syntax
Release Information
Description
Options
Mode
628
flash-disk scan [ repair ] [ disk0 | disk1 ]
Command introduced before JunosE Release 7.1.0.
disk0 and disk1 keywords added in JunosE Release 7.2.0.
Privileged Exec mode added in JunosE Release 8.0.0.
Scans the flash card on the primary SRP module to detect corrupt sectors, deletes files
and directories that contain corrupt sectors, and fixes nonfatal errors. There is no no
version.
repair—Repairs nonfatal errors detected on flash disk
disk0—Specifies flash card in slot 0 of the SRP module; default value is disk0; available
only in Boot mode, because disk0 cannot be in an unmounted state in a router outside
of Boot mode
disk1—Specifies flash card in slot 1 of the SRP module; supported only on the E120
router and the E320 router
Boot, Privileged Exec
Copyright © 2010, Juniper Networks, Inc.