Flash-Disk Compare - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

flash-disk compare

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
flash-disk compare { all | configuration }
Command introduced before JunosE Release 7.1.0.
Performs a checksum validation that compares the contents of the NVS file system on
the primary SRP module with the contents of the NVS file system on the redundant SRP
module, and detects any differences. The command validates only those files that are
synchronized between the primary and redundant SRP modules; it does not validate log
files, core dump files, and other files that are excluded from the system synchronization
process. There is no no version.
all—Compares all files in NVS; this option can take several minutes to complete
configuration—Compares only configuration files; this option takes less time to complete
because it compares only a subset of the files in the NVS file system
Privileged Exec
Chapter 7: F Commands
625