Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Destination: 300::/64
NextHop
Interface
Refer to
1.1.15 display ipv6 routing-table ipv6-prefix
Syntax
display ipv6 routing-table ipv6-prefix ipv6-prefix-name [ verbose ]
View
Any view
Parameters
ipv6-prefix-name: Name of the IPv6 prefix list, in the range 1 to 19 characters.
verbose: Displays both active and inactive verbose routing information. Without this
keyword, only brief active routing information is displayed.
Description
Use the display ipv6 routing-table ipv6-prefix command to display routes permitted
by the IPv6 prefix list.
Examples
# Display brief active routing information permitted by the IPv6 prefix list test2.
<Sysname> display ipv6 routing-table ipv6-prefix test2
Routes Matched by Prefix list
Summary Count : 1
Destination: 100::/64
NextHop
Interface
Refer to
1.1.16 display ipv6 routing-table protocol
Syntax
display ipv6 routing-table protocol protocol [ inactive | verbose ]
View
Any view
: 1::2
: Vlan1
Table 1-9
for description about the above output.
: ::
: NULL0
Table 1-9
for description about the above output.
Chapter 1 Routing Overview Commands
test2
:
1-22
Protocol
: Static
Preference: 60
Cost
: 0
Protocol
: Static
Preference: 60
Cost
: 0