Display Ip Routing-Table Acl - H3C S3100 Series Command Manual

Description
Use the display ip routing-table command to display the summary information about the routing table.
This command displays the summary information about a routing table, with the items of a routing entry
contained in one line. The information displayed includes destination IP address/mask length, protocol,
preference, cost, next hop and outbound interface.
The display ip routing-table command only displays the routes currently in use, that is, the optimal
routes.
Example
# Display the summary information about the routing table.
<Sysname> display ip routing-table
Routing Table: public net
Destination/Mask
127.0.0.0/8
127.0.0.1/32
Table 1-1 Description on the fields of the display ip routing-table command
Field
Destination/Mask
Protocol
Pre
Cost
Nexthop
Interface

display ip routing-table acl

Syntax
display ip routing-table acl acl-number [ verbose ]
View
Any view
Parameter
acl-number: Number of a basic access control list (ACL), in the range of 2000 to 2999.
verbose: Displays the detailed information about the active and inactive routes that match the specified
ACL. If you do not specify this keyword, only the summary information about the active routes matching
the specified ACL is displayed.
Description
Use the display ip routing-table acl command to display the routes that match a specified basic ACL.
Protocol Pre Cost
DIRECT 0 0
DIRECT 0 0
Destination IP address/mask length
Routing protocol that discovers the route
Route preference
Route cost
Next hop IP address of the route
Outbound interface, through which packets destined for the destination
network segment are to be transmitted
Nexthop
127.0.0.1
127.0.0.1
Description
1-2
Interface
InLoopBack0
InLoopBack0