Display Fr Dlci-Switch - H3C MSR 20-20 Command Reference Manual

372 C 22: F
HAPTER RAME
Description
Related commands:
Example

display fr dlci-switch

Syntax
View
Parameter
Description
Example
R C C
ELAY ONFIGURATION OMMANDS
Use the display fr compress
about frame relay compression. If no interface is specified, the DLCI statistics
information for all interfaces is displayed.
fr compression frf9.
# Display the frame relay compression statistics information of FRF.9 stac.
<Sysname> display fr compress
Serial2/0
-DLCI:22
enable frame-relay compression
uncompressed bytes send/receive : 0/0
compressed bytes send/receive : 0/0
1 min avg ratio send/receive :
5 min avg ratio send/receive :
Table 39 Description on the fields of the display fr compress command
Field
enable frame-relay compression
uncompressed bytes send/receive
compressed bytes send/receive
1 min avg ratio send/receive
5 min avg ratio send/receive
display fr dlci-switch [ interface interface-type interface-number ]
Any view
interface interface-type interface-number: Specifies an interface by its type and
number.
Use the
display fr dlci-switch
configured FR switching to check if the frame relay switching of a user is correctly
configured.
The interface specified by interface-type interface-number can only be a main
interface. If no interface is specified, this command displays the information about
all the main interfaces.
# Display the information of the configured FR switching.
<Sysname> display fr dlci-switch
Frame relay switch statistics
Status Interface(Dlci)
Inactive Serial2/1(100)
command to display the statistics information
0.000/0.000
0.000/0.000
Description
Frame relay compression is enabled
Size of the uncompressed data transmitted
/received (in bytes)
Size of the compressed data transmitted/received
(in bytes)
Average transmission/receiving rate during the
latest one minute
Average transmission/receiving rate during the
latest five minutes
command to display the information about the
<----------> Interface(Dlci)
Serial2/0(300)