416
C
24: GVRP C
HAPTER
display gvrp status
Syntax
View
Parameter
Description
Example
gvrp
Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION
OMMANDS
display gvrp status
Any view
None
Use the
display gvrp status
of GVRP.
# Display the global GVRP enable/disable state.
<Sysname> display gvrp status
GVRP is enabled
gvrp
undo gvrp
System view, Ethernet interface view, port group view
None
Use the
gvrp
command to enable GVRP.
Use the
undo gvrp
Disabling GVRP globally also disables it on all ports.
By default, GVRP is disabled.
Configured in system view, the setting is globally effective; configured in Ethernet
interface view, the setting is effective on the current port only; configured in port
group view, the setting is effective on all ports in the port group.
n
To enable GVRP on a port, you need to enable it globally.
■
The port where you enable/disable GVRP must be a trunk port.
■
display gvrp status.
# Enable GVRP globally.
<Sysname> system-view
[Sysname] gvrp
GVRP is enabled globally.
command to display the global enable/disable state
command to disable GVRP.