X25 Template - H3C MSR 20-20 Command Reference Manual

x25-template
Syntax
View
Parameter
Description
Example

x25 template

Syntax
View
Parameter
Description
Example
[Sysname-Serial2/0] fr interface-type dte
[Sysname-Serial2/0] timer hold 15
x25-template name
undo x25-template name
DLCI interface view
Name: Name of an X.25 template, a string of 1 to 30 characters.
Use the
x25-template
Use the
undo x25-template
a VC.
Annex G implements X.25 over FR. You can configure X.25 parameters for an
X.25 over FR DLCI using the x25 template command and apply the template in
DLCI interface view.
# Apply the X.25 template named "vofr" to DLCI 100.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr dlci 100
[Sysname-fr-dlci-Serial2/0-100] x25-template vofr
x25 template name
undo x25 template name
System view
Name: Name of an X.25 template, a string of 1 to 30 characters.
Use the x25 template
template view.
Use the
undo x25 template
As for the x25 template command, if the X.25 template identified by the name
argument already exists, this command leads you to X.25 template view.
X.25-/LAPB-related parameters are configured in X.25 template view.
# Create an X.25 template named "vofr".
command to apply an X.25 template to a VC.
command to remove the X.25 template applied to
command to create an X.25 template or enter X.25
command to remove an X.25 template.
409