412
C
23: GARP C
HAPTER
Description
Related command:
Example
garp timer
Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
defined without the to interface-type interface-number portion comprises only
one port.
Use the
display garp timer
Note that:
If the interface interface-list keyword-argument combination is not specified,
■
this command displays the GARP timer settings of all the ports.
If the interface interface-list keyword-argument combination is specified, this
■
command displays the GARP timer settings of the specified ports.
garp timer, garp timer leaveall.
# Display GARP timers on port Ethernet 1/0.
<Sysname> display garp timer interface ethernet 1/0
GARP timers on port Ethernet1/0
garp timer { hold | join | leave } timer-value
undo garp timer { hold | join | leave }
Ethernet interface view, port group view
hold: Sets the hold timer.
join: Sets the join timer.
leave: Sets the leave timer.
timer-value: Timer setting (in centiseconds), which must be a multiple of 5.
Use the
garp timer
ports in a port group in compliance with the timer setting dependencies shown in
Table 53.
Use the
undo garp timer
may fail if the default does not satisfy the dependencies shown in Table 53.
By default, the hold timer, the join timer, and the leave timer are set to 10
centiseconds, 20 centiseconds, and 60 centiseconds.
command to display GARP timers.
Garp Join Time
Garp Leave Time
Garp LeaveAll Time
Garp Hold Time
command to set a GARP timer for an Ethernet port or all
command to restore the default of a GARP timer. This
: 20 centiseconds
: 60 centiseconds
: 1000 centiseconds
: 10 centiseconds