Mfr Timer Hello; Mfr Window-Size - H3C MSR 20-20 Command Reference Manual

406 C 22: F
HAPTER RAME

mfr timer hello

Syntax
View
Parameter
Description
Example

mfr window-size

Syntax
View
Parameter
Description
R C C
ELAY ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] mfr timer ack 6
mfr timer hello seconds
undo mfr timer hello
Frame relay interface view
seconds: Interval (in seconds) for a bundle link to send hello message, in the range
1 to 180.
Use the
mfr timer hello
link to send hello message.
Use the undo mfr timer hello
By default, the interval for a frame relay bundle link to send hello message is 10
seconds.
Only after the link-protocol fr mfr command is used to associate a frame relay
bundle link interface with a frame relay bundle, can this command be configured.
# Set the bundle link Serial 2/0 to send hello message once every 15 seconds.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] mfr timer hello 15
mfr window-size number
undo mfr window-size
MFR interface view
number: Number of fragments, in the range 1 to 16.
Use the
mfr window-size
can be hold by the window used in sliding window algorithm when multilink
frame relay reassembles received fragments.
Use the
undo mfr window-size
By default, the size of a sliding window is equal to the number of physical
interfaces of an MFR bundle.
command to set the interval for a frame relay bundle
command to restore the default.
command to configure the number of fragments that
command to restore the default.