Parameter
Description
Example
reset dlsw tcp
Syntax
View
Parameter
Description
Example
None
Use the
reset dlsw reachable-cache
information.
# Clear the DLSw reachability information.
<Sysname> reset dlsw reachable-cache
reset dlsw tcp [ ip-address ]
User view
ip-address: IP address of the remote peer.
Use the
reset dlsw tcp
DLSw router and a remote peer or all remote peers.
Note that:
This command without ip-address resets the TCP connections between the
■
DLSw router and all current remote peers; otherwise, this command resets the
TCP connection between the DLSw router and the specified remote peer.
In the case of a manual configured remote peer, this command disconnects the
■
current TCP connection, and initiates a new TCP connection request to
establish new TCP connection.
In the case of a remote peer dynamically learned, this command disconnects
■
the current TCP connection and deletes the remote peer.
# Reset the TCP connections will all remote peers.
<Sysname> debugging dlsw tcp
<Sysname> reset dlsw tcp
DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be deleted
DLSW_TCP 4.4.4.3:Rebulid tcp with the peer
# Reset the TCP connection with a remote peer with the IP address of 4.4.4.2.
<Sysname> reset dlsw tcp 4.4.4.2
DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be deleted
Table 38 Description on the fields of the reset dlsw tcp command
Field
DLSw_TCP 4.4.4.2:The remote peer is learned
dynamically,it will be deleted
DLSW_TCP 4.4.4.3 : rebuild tcp with the peer
command to clear DLSw reachability
command to reset the TCP connection between the
Description
The remote peer 4.4.4.2 was learned
dynamically and will be deleted by
DLSw.
The remote peer 4.4.4.3 was manually
configured and therefore the TCP
connection with it will be
reestablished.
359