380
C
22: F
HAPTER
RAME
display interface mfr
Syntax
View
Parameter
Description
Example
R
C
C
ELAY
ONFIGURATION
OMMANDS
display interface mfr [ interface-number | interface-number.subnumber ]
Any view
interface-number: MFR interface number, in the range 0 to 1023.
interface-number.subnumber: MFR subinterface number, of which,
interface-number is the main interface number, and subnumber is subinterface
number. The subnumber argument ranges from 0 to 1023.
Use the
display interface mfr
MFR interface or an MFR sub-interface, including configuration, state, and packet
statistics.
If you do not specify an MFR interface or an MFR sub-interface, this command
displays the information about all the MFR interfaces.
# Display the configuration and status information about interface MFR4.
<Sysname> display interface mfr 4
MFR4 current state : UP
Line protocol current state : UP
Description : MFR4 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 12.12.12.2/16 Primary
Link layer protocol is FR IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
LMI status enquiry sent 435, LMI status received 435
LMI status timeout 0, LMI message discarded 0
Physical is MFR, baudrate: 2048000 bps
Output queue: (Urgent queue: Size/Length/Discards) 0/50/0
Output queue: (Protocol queue: Size/Length/Discards) 0/500/0
Output queue: (FIFO queuing: Size/Length/Discards) 0/75/0
Last 300 seconds input:
Last 300 seconds output:
1058 packets input, 832389 bytes, 0 drops
619 packets output, 828190 bytes, 0 drops
Table 49 Description on the fields of the display interface mfr command
Field
MFR4 current state : UP
Line protocol current state : UP
Description : MFR4 Interface
The Maximum Transmit Unit is 1500
Internet Address is 12.12.12.2/16
link-protocol is FR IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
command to display the information about an
0 bytes/sec, 0 packets/sec
0 bytes/sec, 0 packets/sec
Description
Physical layer state
Link layer state
Interface description
MTU
IP address and mask
Link layer protocol
DLCI number used by LMI, LMI type,
port type and operating mode