Fr Lmi N391Dte - H3C MSR 20-20 Command Reference Manual

390 C 22: F
HAPTER RAME
fr iphc
Syntax
View
Parameter
Description
Related command:
Example

fr lmi n391dte

Syntax
View
Parameter
R C C
ELAY ONFIGURATION OMMANDS
fr iphc { nonstandard | rtp-connections number1 | tcp-connections number2 |
tcp-include }
undo fr iphc { nonstandard | rtp-connections | tcp-connections | tcp-include }
Frame relay interface view, MFR interface view
nonstandard: Nonstandard compatible compression format.
rtp-connections number1: The number of RTP compression connections, in the
range 3 to 1000. By default, the number of RTP compression connections is 16.
tcp-connections number2: The number of TCP compression connections, in the
range 3 to 256. By default, the number of TCP compression connections is 16.
tcp-include: Includes TCP header compression when performing RTP
compression.
Use the fr iphc command to enable IP header compression function, including
RTP/TCP header compression.
Use the
undo fr iphc
function.
Use the undo fr iphc
restore the default compression connection numbers of RTP and TCP.
By default, number1 and number2 are 16.
fr map ip, fr compression iphc.
# Configure the number of RTP compression connections as 200 on the frame
relay Serial 2/0.
<Sysname> system-view
[Sysname] interface serial2/0
[Sysname-Serial2/0] fr iphc rtp-connections 200
fr lmi n391dte n391-value
undo fr lmi n391dte
Interface view
n391-value: The value of counter N391, ranges from 1 to 255.
{ nonstandard | tcp-include } command to disable this
{ rtp-connections | tcp-connections } command to