414
C
23: GARP C
HAPTER
Related command:
Example
reset garp statistics
Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION
OMMANDS
Each time a device on the network receives a LeaveAll message, it resets its leaveall
timer. Therefore, a GARP application entity may send LeaveAll messages at the
interval set by its leaveall timer or the leaveall timer on another device on the
network, whichever is smaller.
display garp timer.
# Set the leaveall timer to 100 centiseconds, assuming that the leave timer is 60
centiseconds.
<Sysname> system-view
[Sysname] garp timer leaveall 100
reset garp statistics [ interface interface-list ]
User view
interface interface-list: Specifies an Ethernet port list, in the format of
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 port ranges. A port range
defined without the to interface-type interface-number portion comprises only
one port.
Use the
reset garp statistics
or all ports.
Note that:
If the interface interface-list keyword-argument combination is not specified,
■
this command clears the GARP statistics of all the ports.
If the interface interface-list keyword-argument combination is specified, this
■
command clears the GARP statistics of the specified ports.
display gvrp statistics.
# Clear statistics about GARP on all ports.
<Sysname> reset garp statistics
command to clear GARP statistics of the specified