Link-Protocol Hdlc; Timer Hold - H3C MSR 20-20 Command Reference Manual

25

link-protocol hdlc

Syntax
View
Parameter
Description
Related command:
Example

timer hold

Syntax
View
Parameter
Description
HDLC C
ONFIGURATION
link-protocol hdlc
Interface view
None
Use the
link-protocol hdlc
interface.
As a data link layer protocol, HDLC can carry network layer protocols, such as IP
and IPX.
By default, PPP encapsulation is configured on an interface.
timer hold
# Configure HDLC encapsulation on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol hdlc
timer hold seconds
undo timer hold
Interface view
seconds: Link status polling interval (in seconds), in the range 0 to 32767.
Use the command to set the polling interval.
timer hold
Use the undo timer hold
By default, the link status polling interval is 10 seconds on the interface.
command to configure HDLC encapsulation on the
command to restore the default.
C
OMMANDS