Llc2 Max-Send-Queue; Llc2 Max-Transmission - H3C MSR 20-20 Command Reference Manual

Example

llc2 max-send-queue

Syntax
View
Parameter
Description
Example

llc2 max-transmission

Syntax
View
Parameter
Description
Use the
undo max-pdu
size.
By default, the maximum LLC2 PDU size is 1,493 bytes.
# Set the maximum LLC2 PDU size to 1,000 bytes on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-pdu 1000
llc2 max-send-queue length
undo llc2 max-send-queue
Ethernet interface view
length: The length of the LLC2 output queue, in the range of 20 to 200.
Use the llc2 max-send-queue
output queue.
Use the
undo llc2 max-send-queue
By default, the length of the LLC2 output queue is 50.
# Set the length of the LLC2 output queue to 30 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-send-queue 30
llc2 max-transmission retries
undo llc2 max-transmission
Ethernet interface view
retries: LLC2 transmission retries, in the range of 1 to 255.
Use the
llc2 max-transmission
transmission retries, namely the maximum number of times an information frame
is retransmitted before an acknowledgment frame is received from the peer.
Use the undo llc2 max-transmission
command to restore the default maximum LLC2 PDU
command to configure the length of the LLC2
command to restore the default setting.
command to configure the number of LLC2
command to restore the default setting.
353