Display Fr Pvc-Info - H3C MSR 20-20 Command Reference Manual

378 C 22: F
HAPTER RAME

display fr pvc-info

Syntax
View
Parameter
Description
Related command:
Example
R C C
ELAY ONFIGURATION OMMANDS
Table 46 Description on the fields of the display fr map-info pppofr command
Field
Fr Interface
DLCI
Fr State
PPP Interface
PPP Phase
display fr pvc-info [ interface interface-type { interface-number |
interface-number.subnumber } ] [ dlci-number ]
Any view
interface interface-type { interface-number | interface-number.subnumber }:
Specifies an interface by its type and number. It can be a main or subinterface. The
interface-type argument is an interface type. The interface-number argument is a
main interface number. The subnumber argument is a subinterface number, in the
range 0 to 1023.
dlci-number: virtual circuit number of frame relay interface. It ranges from 16 to
1007.
Use the
display fr pvc-info
and statistics about data transmitted and received on them.
If the command is performed with no interface or DLCI specified, the displayed
information covers all PVCs; if with an interface (a main interface or subinterface)
specified, the displayed information covers only the PVCs on the interface; and if
with a DLCI specified, the displayed information covers only the specified PVC.
fr dlci.
# Display the frame relay PVC table.
<Sysname> display fr pvc-info
PVC statistics for interface Serial2/0 (DTE, physical UP)
DLCI = 100, USAGE = UNUSED (0000), Serial2/0
create time = 2000/04/01 23:55:39, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
DLCI = 102, USAGE = LOCAL (0010), INTERFACE = Serial2/0.1
create time = 2000/04/01 23:56:14, status = active
in BECN = 0, in FECN = 0
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
Description
Frame relay interface name
DLCI number
Frame relay state
Name of the associated PPP virtual template interface
Phase of the PPP session
command to display state information on FR PVCs