Fr Switch; Fr Map Ppp - H3C MSR 20-20 Command Reference Manual

fr map ppp

Syntax
View
Parameter
Description
Related command:
Example

fr switch

Syntax
View
Parameter
fr map ppp dlci-number interface virtual-template interface-number
undo fr map ppp [ dlci-number ]
Interface view
dlci-number: Specific DLCI number in the range of 16 to 1007.
virtual-template interface-number: Virtual template interface number in the
range of 0 to 1023.
Use the fr map ppp command to map the frame relay DLCI (corresponds to an
Frame Relay PVC) to a PPP link, so the PPPoFR link is established, and thus PPP
packets can be sent/received on FR PVC. The configuration parameter of this PPP
link is up to the parameters configured on the interface specified by interface
virtual-template interface-number.
Use the
undo map ppp
PPPoFR link.
interface virtual-template on page 1759.
# Map DLCI 100 to PPP and establish PPPoFR link on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] fr map ppp 100 interface virtual-template 1
fr switch name [ interface interface-type interface-number dlci dlci1 interface
interface-type interface-number dlci dlci2 ]
undo fr switch name
System view
name: Name of a PVC used for frame relay switching, a string of 1 to 30
characters.
interface interface-type interface-number dlci dlci1: DLCI number at one end of
PVC as well as the type and number of its interface.
interface interface-type interface-number dlci dlci2: DLCI number at the peer end
of PVC as well as the type and number of its interface.
command to cancel this map, and thus eliminates this
397