Sdlc Max-Transmission; Sdlc Modulo - H3C MSR 20-20 Command Reference Manual

364 C 21: B
HAPTER ASIC
Description
Example

sdlc max-transmission

Syntax
View
Parameter
Description
Example

sdlc modulo

Syntax
View
Parameter
DLS C C
W ONFIGURATION OMMANDS
Use the sdlc max-send-queue
output queue.
Use the
undo sdlc max-send-queue
By default, the length of the SDLC output queue is 50.
# Set the length of the SDLC output queue to 30 on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc max-send-queue 30
sdlc max-transmission retries
undo sdlc max-transmission
Synchronous serial interface view
retries: Maximum number of SDLC transmission retries, in the range of 1 to 255
times.
Use the
sdlc max-transmission
of SDLC transmission retries, namely the number of times a frame is retransmitted
before an acknowledgment is received from the peer.
Use the undo sdlc max-transmission
By default, the maximum number of SDLC transmission retries is 20.
# Set the maximum SDLC transmission retries to 30 on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc max-transmission 30
sdlc modulo { 8 | 128 }
undo sdlc modulo
Synchronous serial interface view
8: Specifies the modulus value to be 8.
128: Specifies the modulus value to be 128.
command to configure the length of the SDLC
command to restore the default setting.
command to configure the maximum number
command to restore the default setting.