356
C
21: B
HAPTER
ASIC
View
Parameter
Description
Example
llc2 timer busy
Syntax
View
Parameter
Description
Example
llc2 timer detect
Syntax
DLS
C
C
W
ONFIGURATION
OMMANDS
Ethernet interface view
mseconds: LLC2 local acknowledgment delay, in milliseconds. The effective range
is 1 to 60,000.
Use the
llc2 timer ack-delay
acknowledgment delay time, namely the maximum length of time the device
waits before sending an acknowledgment to the peer end upon receiving an LLC2
frame.
Use the
undo llc2 timer ack-delay
By default, the LLC2 local acknowledgment delay time is 100 milliseconds.
# Set the LLC2 local acknowledgment delay time to 200 milliseconds on Ethernet
1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer ack-delay 200
llc2 timer busy mseconds
undo llc2 timer busy
Ethernet interface view
mseconds: LLC2 busy-station polling interval, in milliseconds. The effective range is
1 to 60,000. The system default is 300 milliseconds.
Use the
llc2 timer busy
interval, namely the amount of time the router waits before repelling a busy
station.
Use the
undo llc2 timer busy
# Set the LLC2 busy-station polling interval to 200 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer busy 200
llc2 timer detect mseconds
undo llc2 timer detect
command to configure the LLC2 local
command to restore the default setting.
command to configure the LLC2 busy-station polling
command to restore the default setting.