Sdlc Timer Ack; Sdlc Timer Lifetime - H3C MSR 20-20 Command Reference Manual

368 C 21: B
HAPTER ASIC
Example

sdlc timer ack

Syntax
View
Parameter
Description
Example

sdlc timer lifetime

Syntax
View
Parameter
Description
DLS C C
W ONFIGURATION OMMANDS
# Set the role of the SDLC device connected with Serial 2/0 to primary, and the
role of the local interface to secondary.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc status secondary
sdlc timer ack mseconds
undo sdlc timer ack
Synchronous serial interface view
mseconds: Primary-station acknowledgment waiting time: in milliseconds. The
effective range is 1 to 60,000.
Use the
sdlc timer ack
acknowledgment waiting time, namely the amount of time the primary SDLC
station waits for an acknowledgment from the receiving secondary station after
sending an information frame.
Use the undo sdlc timer ack
By default, the primary-station acknowledgment waiting time is 3,000
milliseconds.
# Set the primary-station acknowledgment waiting time to 2,000 milliseconds on
Serial 2/0.
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc timer ack 2000
sdlc timer lifetime mseconds
undo sdlc timer lifetime
Synchronous serial interface view
mseconds: Secondary-station acknowledgment waiting time in milliseconds. The
effective range is 1 to 60,000.
Use the
sdlc timer lifetime
acknowledgment waiting time, namely the amount of time a secondary SDLC
station waits for an acknowledgment from the primary station after sending an
information frame.
command to configure the primary-station
command to restore the default setting.
command to configure the secondary-station