Mfr Fragment; Mfr Fragment-Size - H3C MSR 20-20 Command Reference Manual

402 C 22: F
HAPTER RAME
Example

mfr fragment

Syntax
View
Parameter
Description
Example

mfr fragment-size

Syntax
View
R C C
ELAY ONFIGURATION OMMANDS
Use the undo mfr bundle-name
By default, BID is represented by mfr plus frame relay bundle number, for example,
mfr4.
Each MFR bundle has a BID, which only has local significance. Therefore, the same
BID can be used at both ends of the link.
Note that:
In spite of the default BID, you cannot configure a BID as a string in the form of
■
mfr + number.
After changing the BID of an MFR interface, you must execute the shutdown
■
and undo shutdown command on the interface to validate the new BID.
# Set the frame relay link MFR4 BID to bundle1.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] mfr bundle-name bundle1
mfr fragment
undo mfr fragment
MFR interface view
None
Use the
mfr fragment
Use the
undo mfr fragment
By default, fragmentation is disabled on the MFR bundle.
# Enable fragmentation on interface MFR 4.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] mfr fragment
mfr fragment-size bytes
undo mfr fragment-size
Frame relay interface view and MFR interface view
command to restore the default.
command to enable fragmentation on the MFR bundle.
command to disable the function.