Reset Fr Inarp; Shutdown - H3C MSR 20-20 Command Reference Manual

Example

shutdown

Syntax
View
Parameter
Description
Example

reset fr inarp

Syntax
View
Parameter
Description
Related command:
# Set the size of the sliding window of the MFR bundle interface MFR4 to be 8.
<Sysname> system-view
[Sysname] interface mfr 4
[Sysname-MFR4] mfr window-size 8
shutdown
undo shutdown
Frame relay switching view
None
Use the command to disable the current switching PVC.
shutdown
Use the undo shutdown
By default, the switching PVC is enabled.
# Create a PVC named pvc1 on the DCE serving as the switch, which is from the
DLCI 100 of Serial 2/0 to the DLCI 200 of Serial 2/1 and disable the current
switching PVC.
<Sysname> system-view
[Sysname] fr switching
[Sysname] fr switch pvc1 interface serial 2/0 dlci 100 interface ser
ial 2/1 dlci 200
[Sysname-fr-switching-pvc1] shutdown
reset fr inarp
User view
None
Use the reset fr inarp
inverse ARP.
In some special cases, for example, when the network architecture changes, the
dynamic address maps originally established will become invalid. Hence it is
necessary to establish them again. Users can use this command to clear all the
dynamic address maps.
fr inarp.
command to enable the current switching PVC.
command to clear the address mapping established by
407