H3C MSR 20-20 Command Reference Manual page 382

382 C 22: F R
HAPTER RAME
C C
ELAY ONFIGURATION OMMANDS
Table 50 Description on the fields of the display mfr command
Field
Bundle interface
Bundle state
Bundle class
fragment disabled
MFR bundle fragment size
Bundle name
Bundle links
Serial2/0, PHY state = up, link
state = up, Link name = Serial2/0
# Display detailed state information about all frame relay bundle links.
<Sysname> display mfr verbose
Bundle interface:MFR1, Bundle state = up,
fragment enabled, MFR bundle fragment size = 222
original packet be assembled/fragmentized (in/out): 0/0
dropped fragment (in/out): 0/0
Bundle name = 2
Bundle links:
LID : Serial2/0
Bound to MFR1(BID:2)
Physical state: up, link state: up,
Bundle link fragment size: 222,
Bundle Link statistics:
Hello(TX/RX):
Add_link(TX/RX):
Add_link_rej(TX/RX):
Remove_link(TX/RX):
Pkts dropped(in/out): 0/0
Timer: ACK
Retry: Max
Cause code: none
Bundle Link fragment statistics:
Mfr fragment(in/out): 0/0
Table 51 Description on the fields of the display mfr verbose command
Field
LID
Peer LID
Bound to MFR0 (BID:MFR0)
Physical state
link state
Bundle Link statistics:
Description
Bundle interface
Operating state of the bundle interface.
Class A indicates if there is one bundle link is in up state,
the bundle is flagged as up. Moreover, all bundle links
should be tagged as down before the bundle is down.
Indicates whether the fragment is disabled (disabled in this
sample output)
Maximum fragment size allowed by the FR link
Name of multilink frame relay bundle
Physical interfaces of the links in the bundle.
Physical interface on the bundle link, the operating state of
the physical layer interface and link layer interface, the link
name of the bundle link (corresponding name on the
physical interface by default)
Peer LID: Serial2/0
10/10
4/2 Add_link_ack(TX/RX):
0/0
0/0 Remove_link_ack(TX/RX):
4, Hello 10
2, Current 0
Description
Identifier of the bundle link (to be the name of corresponding
physical interface by default)
Identifier of the peer bundle link (to be the name of
corresponding physical interface by default).
The bundle link is bound to MFR0 on the interface MFR
Operating state of the physical interface.
Operating state of the link protocol on the bundle link.
Statistics about the packets on the bundle link.
Bundle class = A,
Hello_ack(TX/RX): 10/10
2/1
0/0