366
C
21: B
HAPTER
ASIC
sdlc sap-map remote
Syntax
View
Parameter
Description
Related command:
Example
sdlc simultaneous
Syntax
View
Parameter
DLS
C
C
W
ONFIGURATION
OMMANDS
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc sap-map local 08 05
sdlc sap-map remote dsap sdlc-addr
undo sdlc sap-map remote dsap sdlc-addr
Synchronous serial interface view
dsap: SAP address of the DLSw peer device, in the range of 0x01 to 0xFE.
sdlc-addr: SDLC address, in the range of 0x01 to 0xFE.
Use the
sdlc sap-map remote
remote DLSw device for use in SDLC-to-LLC2 frame format conversion.
Use the
undo sdlc sap-map remote
By default, the SAP address of the remote DLSw device used in SDLC-to-LLC2
frame format conversion is 0x04.
When an SDLC frame is converted to an LLC2 frame, a SAP address is needed in
addition to the MAC address.
Generally speaking, the SAP address used by the SNA protocol is 0x04, 0x08 or
0x0C.
sdlc sap-map local.
# Configure the SAP address of the remote DLSw device for use in SDLC-to-LLC2
frame format conversion on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc sap-map remote 0C 05
sdlc simultaneous
undo sdlc simultaneous
Synchronous serial interface view
None
command to configure the SAP address of the
command to restore the system default.