Parameter
Description
Example
llc2 timer ack
Syntax
View
Parameter
Description
Example
llc2 timer ack-delay
Syntax
length: The maximum number of consecutive information frames the router can
send before receiving an acknowledgment from the peer, in the range of 1 to 127.
Use the
llc2 receive-window
consecutive information frames the router can send before receiving an
acknowledgment from the peer.
Use the
undo llc2 receive-window
By default, the maximum number of consecutive information frames the router
can send before receiving an acknowledgment from the peer is 7.
# Set the maximum number of consecutive information frames the router can
send before receiving an acknowledgment from the peer to 10 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 receive-window 10
llc2 timer ack mseconds
undo llc2 timer ack
Ethernet interface view
mseconds: LLC2 acknowledgment waiting time in milliseconds. The effective
range is 1 to 60,000.
Use the
llc2 timer ack
waiting time, namely the maximum length of time the router waits for an
acknowledgment from the peer after sending an LLC2 frame.
Use the
undo llc2 timer ack
By default, the LLC2 acknowledgment waiting time is 200 milliseconds.
# Set the LLC2 acknowledgment waiting time to 10 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 timer ack 10
llc2 timer ack-delay mseconds
undo llc2 timer ack-delay
command to configure the maximum number of
command to restore the default setting.
command to configure the LLC2 acknowledgment
command to restore the default setting.
355