Display Fr Map-Info Pppofr - H3C MSR 20-20 Command Reference Manual

display fr map-info pppofr

Syntax
View
Parameter
Description
Example
<Sysname> display fr map-info
Map Statistics for interface Serial2/0 (DTE)
DLCI = 100, IP INARP 100.100.1.1, Serial2/0
create time = 2002/10/21 14:48:44, status = ACTIVE
encapsulation = ietf, vlink = 14, broadcast
DLCI = 200, IP INARP 100.100.1.1, Serial2/0
create time = 2002/10/21 14:34:42, status = ACTIVE
encapsulation = ietf, vlink = 0, broadcast
DLCI = 300, IP 1.1.1.1, Serial2/0
create time = 2002/10/21 15:03:35, status = ACTIVE
encapsulation = ietf, vlink = 15
Table 45 Description on the fields of the display fr map-info command
Field
Map Statistics for interface
Serial2/0 (DTE)
DLCI = 100, IP INARP
100.100.1.1, Serial2/0
create time = 2002/10/21
14:48:44
status = ACTIVE
encapsulation = ietf
broadcast
display fr map-info pppofr [ interface interface-type { interface-number |
interface-number.subnumber } ]
Any view
interface interface-type { interface-number | interface-number.subnumber }:
Specifies an interface by its type and number. It can be a main or subinterface. The
interface-type argument is an interface type. The interface-number argument is a
main interface number. The subnumber argument is a subinterface number, in the
range 0 to 1023.
Use the
display fr map-info pppofr
frame relay (PPPoFR) mappings and their states for the specified or all interfaces.
# Display information about current PPPoFR mappings and their states.
<Sysname> display fr map-info pppofr
Fr Interface DLCI
Serial2/0 100
Serial2/1 200
Description
Display the frame relay address map. The interface operates
in DTE mode.
The PVC with DLCI 100 is mapped to remote IP address
100.100.1.1 through INARP. The PVC is configured on the
interface Serial2/0 (If the keyword INAPP is not provided,
you need to manually configure established address
mapping.)
Time and date when the map entry was created
State of the map entry
Encapsulation is set to IETF
Broadcasts are permitted
command to display current PPP over
Fr State PPP Interface
down Virtual-Template1
down Virtual-Template2
377
PPP Phase
Phase:0
Phase:0