Display Mfr - H3C MSR 20-20 Command Reference Manual

display mfr

Syntax
View
Parameter
Description
Example
Table 49 Description on the fields of the display interface mfr command
Field
LMI status enquiry sent 435, LMI status received 435
LMI status timeout 0, LMI message discarded 0
Physical is MFR
Output queue: (Urgent queue: Size/Length/Discards)
0/50/0
Output queue: (Protocol queue: Size/Length/Discards)
0/500/0
Output queue: (FIFO queuing: Size/Length/Discards)
0/75/0
Last 300 seconds input: 0 bytes/sec, 0 packets/sec
Last 300 seconds output: 0 bytes/sec, 0 packets/sec
1058 packets input, 832389 bytes, 0 drops
619 packets output, 828190 bytes, 0 drops
display mfr [ interface interface-type interface-number | verbose ]
Any view
interface interface-type interface-number: Specifies an interface by its type and
number.
verbose: Displays detailed statistics information, including the number of
controlling packets sent and received.
Use the display mfr command to display configuration and statistics information
of multilink frame relay bundle and bundle link. If no bundle or bundle link is
specified, information about all bundles and bundle links is displayed.
# Display configuration and state information about all frame relay bundles and
frame relay bundle links.
<Sysname> display mfr
Bundle interface:MFR1, Bundle state = up,
fragment disabled, MFR bundle fragment size = 222
original packet be assembled/fragmentized (in/out): 0/0
dropped fragment (in/out): 0/0
Bundle name = 2
Bundle links:
Serial2/0, PHY state = up, link state = up,
Description
Transmitted and received LMI status
enquiry messages
LMI timeout messages and dropped
LMI messages
Physical interface is MFR
Statistics on the packets of the
following interface output queues:
Urgent queue
■
Protocol queue
■
FIFO queue
■
Input rate of the interface within the
last five minutes
Output rate of the interface within the
last five minutes
Packets and bytes received on the
interface and packets dropped as the
result of full receive buffer
Packets and bytes transmitted on the
interface and packets dropped as the
result of full transmit buffer
Bundle class = A,
Link name : Serial2/0
381